When obnizOS has multiple network settings, it will try to connect to a different network when it fails to connect to the preferred network.
This makes it possible to do things like "connect to an LTE line because I can't connect to Wi-Fi anymore".
How to configure
Network failover is always available as long as multiple settings are saved. If you do not want to use it, you need to clear the settings and then save only one network setting.
If you are using a browser, follow the steps below to configure. 1.
Configure the non-priority network settings. 2.
Configure the network settings for the preferred corpse.
The above configuration method is used because the priority is given to the last configuration.