IRModule

Detecting and sending Infrared signal like a remote controller's signal.

wired(obniz, { send, recv[, vcc, gnd]})

Connect send, recv, vcc and gnd. vcc and gnd is optional.

// Javascript Example
var module = obniz.wired('IRModule', { vcc: 0, send: 1, recv: 2, gnd: 3 });

start(callback(array))

start monitoring. and set detect callback.

// Javascript Example
var module = obniz.wired('IRModule', { vcc: 0, send: 1, recv: 2, gnd: 3 });
module.start(function (arr) {
  console.log('detected!!')
  console.log(JSON.stringify(arr));
})

arr is same as obniz.LogicAnalyzer's result.
So, It's like below.

[1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,0,0,0,0,0,0,0]

monitor options and these default value
See more details on logicanalyzer document

You can chenge these before start.

// Javascript Example
var module = obniz.wired('IRModule', { vcc: 0, send: 1, recv: 2, gnd: 3 });
module.duration = 150;
module.dataInverted = false;
module.start(function (arr) {
  console.log('detected!!')
  console.log(JSON.stringify(arr));
})

ondetect = function(array)

set callback after started

// Javascript Example
var module = obniz.wired('IRModule', { vcc: 0, send: 1, recv: 2, gnd: 3 });
module.start()

module.ondetect = function(arr) {
  console.log('detected!!')
  console.log(JSON.stringify(arr));
}

send(array)

send a array of signal.
data baud rate is defined in dataBaud(default 70usec)

This function use pwm.modulate. see more dtail on pwm document.

You can record your remote controller's signal by start(callback) function.

// Javascript Example
// Example: Turn on KOIZUMI's Room Lamp
var module = obniz.wired('IRModule', { vcc: 0, send: 1, recv: 2, gnd: 3 });
module.send([1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1])

dataSymbolLength

baudrate of signal array.
default is 70usec(0.07)
See more dtail on pwm modulate document.

// Javascript Example
var module = obniz.wired('IRModule', { vcc: 0, send: 1, recv: 2, gnd: 3 });
module.dataSymbolLength = 0.1 // 100usec baud rate
led.send([1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,1,1])