obnizOS uses one of the following methods to connect to the Internet

- Wi-Fi (b/g/n 2.4GHz)
- Wi-Fi MESH (b/g/n 2.4GHz)
- Ethernet (component required)
- 3G/LTE (component required)

## Configuration

The following settings can be configured for obnizOS.

Network | Max Settings | Description
---|---|---
Wi-Fi | 5 | Up to 5 Wi-Fi settings, Proxy, etc. can be saved. You cannot store multiple settings for the same SSID.
Wi-Fi MESH | 5 | You can save up to 5 Wi-Fi MESH settings, Proxy, etc. Saving the settings will save all of them, even if they are the same settings.
Ethernet | 1 | Save only one setting related to Proxy, static IP.
3G/LTE | 1 | Saves only one setting related to apn, id, pass.

For more information about network settings, please refer to the configuration page.

## Priority settings

Multiple settings can be saved in obnizOS, but you will have to specify the first priority network.
If you set the priority to Wi-Fi when configuring Wi-Fi and 3G/LTE settings, you can use network failover, which says "If all settings set for Wi-Fi fail, connect with 3G/LTE".
